800-866-3443 7am to 4pm Mon-Thurs & 7am to 3:30pm Fri PST

Small Block Chevy Blowout


Small Block Chevy Blowout

 

The Small Block Chevy (SBC) originally designed as a 265CI engine by Ed Cole for Chevrolet first appeared in the 1955 model year Corvette and has been made in several displacements ranging from the 265, 283, 305, 327, 350 and many others all the way up to 400 cubic inches. A form of the SBC was available in just about every division of General Motors at some point. They all share the same basic architecture and several parts thus helping to reduce GM’s production costs. The LT & LS superseded the SBC in the 90’s and GM finally discontinued the motor in 2003. There have been over 100 million SBC motors built since 1955.

Because the SBC was produced for so many years and the designs shared many parts, through various inventory acquisitions over the years, Egge has accumulated a large stock of NOS inventory for the SBC and we are now offering these common small block parts at a great value.

  • All parts listed fit, but are not limited to, the following applications.
  • Please refer to our catalog or web listing for complete application information

  • 262 CID (75-76)
  • 267 CID (79-82)
  • 305 CID (77-88)
  • 307 CID (68-73)
  • 327 CID (68-69)
  • 350 CID (67-97)

Oil Pump Part#: 4016

Professionally rebuilt pump guaranteed to meet or exceed original OE specifications. Our pump rebuilding specialists, with over 30 years of experience, completely clean the interior and exterior of all pumps by hand to prevent damage to machined surfaces and replace all worn or damaged parts with new precision fit components to get the perfect clearances required. Every pump is quality tested on our oil pump test stand at engine speed and temperature to ensure the proper pressure and volume for the application.

Buy Now

Rod Bearings Part#: CB663

Multilayered connecting rod bearing designed from the original equipment specifications for the best balance of fatigue resistance, surface behavior & corrosion resistance required for the application.  Packaged in matching sets to obtain complete uniformity in size and oil clearances throughout the engine. Available in the following precision undersizes: STD, .001, .002, .010, .020, .030, .040, .060

Buy Now


Cam Bearings Part#: CH-8

Complete set of camshaft bearings manufactured to the quality, strength and precision required for the application. Available in STD and .002 undersize


Buy Now

Main Bearings Part#: MS2909

Complete set of multilayered crankshaft main bearings designed from the original equipment specifications for the best balance of fatigue resistance, surface behavior & corrosion resistance required for the application. Available in the following precision undersizes: STD, .001, .002, .010, .020, .030, .040

Buy Now

Call us! 800-866-3443